DUAL-WAVE SENSOR - ML SERIES
HOME > 제품소개 > 수질 > Realtech > DUAL-WAVE SENSOR - ML SERIES
DUAL-WAVE SENSOR - ML SERIES
이중 파장 센서 ML
© ML SERIES
© Parameters : TOC, DOC, UV254, UVT, TSS, colour
• 실용적이고 정확하며 경제적인
• 이중 파장(254nm 및 550nm) 센서
• 작동이 간단하고, 유지 보수가 적음
• 폐수부터 고순도 측정 범위까지 (mg/L)
• 무시약 작동
▶ Realtech의 이중 파장 센서는 실시간 유기물, TSS 또는 색상 모니터링을 위한 경제적인 솔루션을 제공합니다.
▶ Split-Sense Pro 및 특허받은 Ortho-beam 기술을 활용하여 이 시리즈는 많은 물 및 폐수 모니터링 응용 제품에 정확하고 안정적인 출력을 제공합니다.
♣ MODEL : ML2010
• RANGE (Abs/cm) : 0 – 20
• PATH LENGTH : 1 mm
♣ MODEL : ML2020
• RANGE (Abs/cm) : 0 - 10
• PATH LENGTH : 2 mm
♣ MODEL : ML2040
• RANGE (Abs/cm) : 0 - 5
• PATH LENGTH : 4 mm
♣ MODEL : ML2100
• RANGE (Abs/cm) : 0 - 2
• PATH LENGTH : 10 mm
♣ MODEL : ML3000
• RANGE (Abs/cm) : 0 – 1
• PATH LENGTH : 10 mm x 20 mm
♣ MODEL : ML4050
• RANGE (Abs/cm) : 0 - 0.4
• PATH LENGTH : 50 mm
♣ MODEL : ML4100
• RANGE (Abs/cm) : 0-0.2
• PATH LENGTH : 100 mm
♣ MODEL : ML4150
• RANGE (Abs/cm) : 0-0.13
• PATH LENGTH : 150 mm
♣ MODEL : ML4250
• RANGE (Abs/cm) : 0 - 0.08
• PATH LENGTH : 250 mm
♣ Real Controller Pro
♣ Real Controller
♣ 희석 시스템
♣ 클리닝 시스템
♣ 에어 퍼지 클리닝 시스템
♣ 펌프 클린 시스템
♣ 펌프 시스템
♣ 이중 공급 시스템 II
SPECIFICATIONS
• Parameters : TOC, DOC, UV254, UVT, TSS, colour
• Units : parameter specific (cm-1, % or mg/L)
• Accuracy : ± 0.5% FS
• Path Lengths : 1 mm, 2 mm, 4 mm, 10 mm, 10 mm x 20 mm, 50 mm, 100 mm, 150 mm, 250 mm
• Sampling Time : 10 seconds
• Calibration : In-situ zeroing to any sample with known UVT. No further calibration required.
• Cleaning : In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional.
• Self-Diagnostic : Detection and diagnosis of internal system fault
• Alarms : Dry contact terminals allow operator configurable alarms for: high and low UVT/UVA set points, low lamp output, leak detected, system fault, etc.
• Humidity Control : Humidity sensor with large regeneratable desiccant system
• Wavelengths : 253.7nm and 550nm
• Light Source : Low-pressure mercury UV lamp and LED
• Lamp Life : 2 years
• Dimensions : 17"H x 14.25"W x 7.5"D (ML2000 series and ML3000) or 17.75"H x 15.5"W x 6.75"D (ML4000 series)
• Enclosure : NEMA 4X, wall mountable
• Flow Rate : 300 - 1000 mL/min
• Pressure Rating : 20 PSI
• Fluid Connections : 1/4" tube push-in fittings
• Storage Temp : -20 to 60°C (-4 to 140°F)
• Operating Temp : 0 to 45°C (32 to 113°F)
• Weight : 22 lbs
• Warranty : 2-year limited warranty
• Technology : Ortho-Beam and Split-Sense Pro
• Sensor Upgrades : High Temp. Upgrade I, High Temp. Upgrade II
* Technical Specifications are subject to change without notice.