• 움직이는 부품, 마모, 유지 보수가 필요 없음

• 높은 기계적 저항

• 더러운 액체의 정확한 측정

• 파이프 크기 범위 : DN15 (0,5")에서 DN600 (24")

• 0.05 ~ 8 m / s (0.15 ~ 25 ft / s) 범위에서 조정 가능한 유량 범위

• 저압 강하

• 사용자 설정 가능한 작동 파라미터

• 4-20mA, 주파수 또는 체적 펄스 출력

• 양방향 유량 측정 선택 가능

• 바닷물 응용 (해수와 같은 고농도의 염화물) 및 고온 조건을 위한 특수 버전

• 물과 폐수 처리

• 원수 흡입구

• 산업 물 분배

• 섬유 산업

• 수영장, 스파 및 수족관

• HVAC

• 가공 및 제조업

• 해수 응용

• FLS M9.02

• FLS M9.50

TECHNICAL DATA

General
• Pipe Size Range : DN15 to DN600 (0.5” to 24”) Please refer to Installation Fitting section for more details
• Max Flow Rate Range :
- F6.60 : from 0,05 to 8 m/s
- F6.63 : from 0,15 to 8 m/s
• Full Scale : 8 m/s (26.24 ft/s)
• Linearity : ± 1% of reading + 1,0 cm/s
• Repeatability : ± 0.5% of reading
• Enclosure : IP65
• Materials :
- case : ABS
• Wetted Materials :
- sensor body: 316L SS/PVDF; 316L SS/ PEEK; CuNi alloy/PVDF
- o-rings : EPDM or FPM
- electrodes : 316L SS or CuNi alloy

Electrical
• Power Supply :
- 12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected)
• Max Current Consumption : 250 mA
- protective earth : < 10 Ω
• Current output :
- 4-20 mA, isolated
- max. loop impedance : 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
- positive or negative flow indication
• Solid State Relay output :
- user selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm, Off
- optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
- max pulse/min : 300
- hysteresis : User selectable
• Open Collector output (Frequency) :
- Type : Open Collector NPN - frequency: 0 – 800 Hz
- max. Pull-up Voltage : 24 VDC
- max. Current : 50 mA, current limited
- compatible with M9.02, M9.50, M9.07, M9.08 and M9.10
• Open Collector output (Direction not available on F6.63) :
- type : Open Collector NPN
- max. Pull-up Voltage : 24 VDC
- max. Current : 50mA, current limited
- flow direction :
0 VDC arrow-wise
+ VDC anti arrow-wise

Enviromental
• Storage Temperature : -30°C to +80°C (-22°F to +176°F)
• Ambient Temperature : -20°C to +70°C (-4°F to +158°F)
• Relative Humidity : 0 to 95% (non-condensing)
• Fluid conditions :
- homogeneous liquids, pastes or slurries, also with solid content
- min electrical conductivity : 20 μS/cm
- temperature :
PVDF bottom version : -10 °C to +60 °C (14 °F to 140 °F)
PEEK bottom version : -10 °C +150 °C (14 °F to 302 °F)
• Max. operating pressure :
- 16 bar @ 25°C (232 psi @ 77°F)
- 8.6 bar @ 60°C (124 psi @ 140°F)

Standards & Approvals
• Manufactured under ISO 9001
• Manufactured under ISO 14001
• CE
• RoHS Compliant
• EAC