FLS F6.30  패들휠 유량 송신기

HOME  >  제품소개  >  수질  >  FIP  >  FLS F6.30

Image
FLS F6.30 - Paddlewheel Flow transmitter
  • 개요
  • 특징
  • 적용 분야
  • 사양

▶ 새로운 FLS F6.30은 패들휠 기반 블라인드 송신기입니다.

▶ 모든 종류의 고체가 없는 액체의 측정에 적용할 수 있습니다.

▶ F6.30은 4-20mA 및 무접점 계전기를 사용하여 다양한 출력 옵션을 제공할 수 있습니다.

▶ 아날로그 출력은 장거리 전송에 사용될 수 있으며, SSR은 알람 또는 볼륨 펄스 출력으로 설정될 수 있습니다.

▶ F6.30 패들휠 유량 트랜스미터에는 USB 인터페이스 및 전용 소프트웨어가 제공되어 계측기를 쉽게 교정하고 PC에서 출력을 직관적으로 설정할 수 있습니다.

▶ 특정 설계로 DN15 (0.5")에서 DN600 (24")까지 파이프 크기의 넓은 동적 범위에서 정확한 유량 측정이 가능합니다.

• 높은 내 화학성

• 파이프 크기 범위 : DN15 (0,5")에서 DN600 (24")

• 저압 강하

• 친숙한 교정 절차

• 4-20 mA, USB로 설정 가능한 주파수 또는 체적 펄스 출력

• PC에서 알람으로 설정할 수 있는 SSR

• 산업용 수 및 폐수 처리

• 냉각수 시스템

• 수영장

• 흐름 제어 및 모니터링

• 물 처리

• 물 재생 공장

• 가공 및 제조업

• 물 분배

TECHNICAL DATA

General
• Pipe Size Range : DN15 to DN600 (0.5” to 24”) Please refer to Installation Fittings section for more details
• Flow Rate Range : 0.15 to 8 m/s (0.5 to 25 ft./s)
• Linearity : ± 0.75 % of full scale
• Repeatability : ± 0.5 % of full scale
• Minimum Reynolds Number Required : 4500
• Enclosure : IP65
• Wetted Materials :
- sensor Body : C-PVC, PVDF or 316L SS
- o-rings : EPDM or FPM
- rotor : ECTFE (Halar®)
- shaft : Ceramic (Al2O3)/ 316L SS (for metal sensors)
- bearings : Ceramic (Al2O3), none (for metal sensor)

Electrical
• Power Supply :
- 12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected)
• Max Power Consumption : 150 mA
- protective earth : < 10 Ω
• 1*Current output :
- 4-20 mA, isolated
- max. loop impedance: 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
• 1*Solid State Relay output :
- user selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm, Off
- optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
- max pulse/min : 300
- hysteresis : User selectable

Environmental
• Storage Temperature : -30°C to +80°C (-22°F to 176°F)
• Ambient Temperature : -20°C to +70°C (-4°F to 158°F)
• Relative Humidity : 0 to 95% (non-condensing)

Standards & Approvals
• Manufactured under ISO 9001
• Manufactured under ISO 14001
• CE
• RoHS Compliant
• EAC
• FDA on request for paddlewheel in C-PVC/EPDM, PVDF/EPDM, SS316L/EPDM.