EXO 광학 습식가스 추출 분진 모니터

HOME  >  제품소개  >  분진  >  EXO

Image

EXO Optical Wet Gas Extractive Dust Monitor

습식 가스의 먼지 농도를 측정하기 위한 LED 기반의 전방 산란 장비

  • 가변 유량 조건에서 연속 동위원소 샘플링
  • 최저 0.1 mg/m³의 연속 분진 수준
  • 광학을 청결하게 유지하기 위해 에어커튼으로 격리된 샘플 스트림 -> 긴 유지 관리 간격
  • 모든 종류의 분진에 대한 정확한 선형 측정
  • 손쉬운 매개 변수화를 위한 컬러 터치스크린
  • LED 광원은 다양한 입자 크기 분포를 다루며, 입자 특성의 영향을 덜 받음.
  • 사양

Specifications

• Measurement : Total Dust, Optical LED Based, Extractive
• Particle Size : From 0,01 µm
• Detection limit : From 0.1 mg/m³
• Measurement range : 0-500 mg/m³ (user changeable)
• Power supply : 400 VAC 3 Phase
• Power consumption : Approximately 15 W (Heater 1,5 kW)
• Purge air supply : Clean, dry instrument air ~30 l/min or separate purge air blower
• Output Signals :
- Eight Digital outputs, 24 V DC, 0,5 A
- Two 4-20 mA output
- Ethernet TCP/IP
- USB for datalogging
• Signal Averaging Time : 1 sec , 30 sec or user selectable (max 3600 sec)
• Ambient Temperature : -20...+50°C
• Stack process conditions : Flue gas below dew point with water droplets
• Humidity without heater : Max 95 % RH (non-condensing)
• Flue Gas Velocity : 5-25 m/s
• Calibration : SRM (standard reference method), gravimetric sampling
• Enclosure : Powder coated steel, IP54
• Size : W: 800 mm, H: 400 mm, D: 300 mm
• Weight : Total weight fully assembled ~120 kg, depending auxiliaries