• 조정 가능한 센서 위치

• 핫 탭 설치

• PC 인터페이스로 사용자가 설정할 수 있는 작동 매개 변수

• 압력 섭취

• 표준 1 ¼" BSP 프로세스 연결

• 움직이는 부품, 마모, 유지 보수가 필요 없음

• 0.05 ~ 8 m / s (0.15 ~ 25 ft / s) 범위에서 설정 가능한 유량 범위

• 더러운 액체의 정확한 측정

• 4-20mA, 주파수 또는 볼륨 펄스 출력

• 양방향 유량 측정 선택 가능

• 물 분배

• 누출 감지 또는 모니터링

• 원수 섭취

• 물과 폐수 처리

• 지하수 개선

• 관개

• FLS FLOWX3 F9.00.L - DISMISSED
• FLS M9.50

TECHNICAL DATA

General
• Pipe Size Range : DN50 to DN900 (2” to 36”). Special version on request for other sizes. Please refer to Installation Fitting section for more details
• Max Flow Rate Range : from 0.05 to 8 m/s (0.15 to 26.24 ft/s)
• Full Scale : 8 m/s (26.24 ft/s)
• Linearity : ± 1% of reading + 1,0 cm/s
• Repeatability : ± 0.5% of reading
• Enclosure : IP65
• Materials :
- case : ABS
• Wetted Materials :
- sensor body : 304 SS/PVDF
- o-rings : EPDM or FPM
- electrodes : 316L SS

Electrical
• Power Supply :
- 12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected)
• Max Current Consumption : 250 mA
- protective earth : < 10 Ω
• Current output :
- 4-20 mA, isolated
- max. loop impedance: 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
- positive or negative flow indication
• Solid State Relay output :
- user selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm, Off
- optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
- max pulse/min : 300
- hysteresis : User selectable
• Open Collector output (Frequency) :
- type : Open Collector NPN
- frequency : 0 – 800 Hz
- max. pull-up voltage : 24 VDC
- max. current : 50 mA, current limited
- compatible with M9.02, M9.50 and M9.07
• Open Collector output (Direction) :
- type : Open Collector NPN
- max. Pull-up Voltage : 24 VDC
- max. Current : 50mA, current limited
- flow direction :
0 VDC arrow-wise
+ VDC anti arrow-wise

Enviromental
• Storage Temperature : -30°C to +80°C (-22°F to 176°F)
• Ambient Temperature : -20°C to +70°C (-4°F to 158°F)
• Relative Humidity : 0 to 95% (non-condensing)
• Fluid conditions :
- homogeneous liquids, pastes or slurries, also with solid content
- Min Electrical Conductivity : 20 μS/cm
- Temperature :
PVDF bottom version : -10 °C to +60 °C (14 °F to 140 °F)
PEEK bottom version : -10 °C +150 °C (14 °F to 302 °F)
• Max. operating pressure :
- 16 bar @ 25°C (232 psi @ 77°F)
- 8.6 bar @ 60°C (124 psi @ 140°F)

Standards & Approvals
• Manufactured under ISO 9001
• Manufactured under ISO 14001
• CE
• RoHS Compliant
• EAC