• 샘플 분석 시간 2분

• 개별 샘플을 측정하거나 대량 샘플 분석을 위해 Sievers 자동시료 주입장치 연결 가능

• 교정, 검증 및 데이터 분석과 같은 자동화된 작업

• 자동시약 주입 기능은 각 샘플에 최적의 유량을 자동으로 설정

• 다양한 샘플 매트릭스 및 농도에 적합

• 최소 예방 유지 보수 (일반적으로 연간 몇 시간만 해당)

• 12개월 교정 안정성

• TOC 및 전도도의 동시 테스트를 위한 옵션 1단계 전도도 기능

• 4초 분석을 위한 옵션 터보 모드

♣  자동시료 주입장치 : 63 또는 120 샘플 위치 용량

♣  DataPro2 소프트웨어 : 맞춤형 샘플 프로토콜 ; 자동교정 및 검증 프로토콜

♣  DataGuard 소프트웨어 : 21 CFR Part 11 및 Annex 11 완벽 준수 지원

♣  무기탄소제거장치 (ICR) : 무기 탄소 수준이 높은 시료의 TOC 정확도 향상

♣  샘플 전도도 : 샘플 전도도 측정 및 보고

♣  터보 모드 : 4초 분석 시간 제공

M9 Lab Specifications

Operating Specifications*
• Range : 0.03 ppb to 50 ppm
• Precision : < 1% RSD
• Accuracy : ± 2% or ± 0.5 ppb, whichever is greater
• Display Readout : 3 significant digits
• Sample Type : Autosampler or discrete grab sample
• Calibration : Typically stable for 12 months
• Analysis Time : 2 minutes (4 seconds with the optional Turbo mode)
• Sample Temperature : 5–95 °C (41–203 °F)
• Ambient Temperature : 5–40 °C (41–104 °F)
• Instrument Sample Flow Rate : 0.5 mL/min

Analyzer Specifications
• Outputs : USB device port (1); USB host ports (3); Modbus TCP/IP
• Display : 7" WVGA 800X480 pixel, Color LCD with touch-screen
• Power : 100 - 240 V~, 50 -60 Hz, 100 VA
• Fuses : Replace with same type and size fuse: T 1.6 A 250 VAC Fuse (Slow Blow), size 5 X 20 mm appliance inlet
• Dimensions : H: 42.2 cm (16.6 in); W: 24.6 cm (9.7 in); D: 40.0 cm (15.8 in)
• Weight : 9.4 kg (20.6 lb)
• Safety Certifications : ETL, CE (see Declaration of Conformity)

Sample Conductivity (Optional)
• Raw Conductivity Range : 0.01 to 2,000 μS/cm
• Conductivity Accuracy : ±0.005 μS/cm or ±1%.whichever is greater
• Precision : <0.25% RSD

Environment
• Maximum Relative Humidity : 0 - 95%, non-condensing
• Maximum Altitude : 3,000 m (9.800 ft)
• Pollution Degree : 2
The UV lamp inside this product contains mercury and must be recycled or disposed of in accordance with local, state, and federal laws.

* Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.

M9 Lab Turbo Specifications

Operating Specifications*
• Range : 0.20 ppb to 10 ppm
• Precision : 2% RSD
• Accuracy : ±10% or ±10ppb whichever is greater
• Display Readout : 3 significant digits
• Sample Type : Grab and Autosampler
• Calibration : Typically stable for 12 months
• Analysis Time : 4 seconds
• Response Time : 3.25 Minutes
• Sample Temperature : 5–95 °C (41–203 °F)
• Ambient Temperature : 10–40 °C (50–104 °F)
• Sample Pressure** : Up to 100 psi
• Instrument Sample Flow Rate : 1.1. ml/min

Analyzer Specifications
• Outputs : USB device port (1); USB host ports (3); Ethernet
• Display : 7" WVGA 800X480 pixel, Color LCD with touch-screen
• Power : 100 - 240 V~, 50 -60 Hz, 100 VA
• Fuses : Replace with same type and size fuse: T 1.6 A 250 VAC Fuse (Slow Blow), size 5 X 20 mm appliance inlet
• Dimensions : H: 42.2 cm (16.6 in); W: 24.6 cm (9.7 in); D: 40.0 cm (15.8 in)
• Weight : 9.4 kg (20.6 lb)
• Safety Certifications : ETL, CE

Consumables
• UV Lamp : 6 months
• Acid Reagent : As needed, typically 6 months
• Oxidizer Reagent : As needed, typically 3-month stability; available in 150- or 300-mL cartridge

* Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.
** If the sample temperature and pressure are above 60 °C and 100 psi, the M9 Analyzer model with the stainless steel iOS is required.